DRONE-RETRIEVER Water Recovery is Assembled in the USA with US, EU & Asian components


visual & audible Lost Drone finderS

  • Self-powered  automatic countdown device that activates 30 min after being turned on. 
  • Device is attached to drone via double sided adhesive.
  • If not turned off or reset 30 min after being activated the device activates.
  • Product #1 VISUAL INDICATOR "ONLY"
    • The unit will operate for 48 hours+ providing enough time to locate your drone. 
    • Item weighs  (5.2 g) which will have no negative effect on ANY small drone.
  • Product #2 VISUAL & 110 db AUDIO INDICATORS
    • The unit will operate for 48+ hours
    • Item weighs (5g) No negative effect on drone flight time.


How it works "Visual Indication Only" accessory

RELEASE DATE: Fall 2019

  

HOW IT WORKS

The DRONE-RETRIEVER Visual Lost Drone Finder 

Most drone pilots don't want their drone to look like a Christmas tree.

The DRONE RETRIEVER LED Devices are designed to be Inactive while flying and in the event of a fly-a-way or crash on non water surfaces, it then operates to provide an illuminated beacon to facilitate visual location.

The delay of 30 min was selected as this appears to be greater than most drone rated flight times.

  • Completely integrated device with control circuitry, On/Off Switch, LED light, When activated Very Bright for 1st 12 hours; moderately bright from 12-18 hours; Bright from 18-24 hours; Visible brightness from 24-48 hours+; Battery life, mounted with double stick tape.
  • Weight 5 grams.   Insignificant effect on flight time for any small to large drone.
  • Operation:
    • To arm unit Push the On/Off button, the LED will flash 3 times and start the 30 countdown timer.
    • To Disarm unit Push the On/Off button, the LED will flash once then turn off.
    • After 30 minute delay the White LED will continually flash until battery power runs out or the device is disarmed.

 Tech Specs: Tentative

  • Size:  (L x W x H): 37x26x6 mm 
  • Weight: 5.2 grams
  • Battery: Lithium #CR2032 2x
  • Battery Voltage: 3vdc
  • System Voltage: 6vdc




image2

FLY-a-way LED Visual Indicator

Check out this great video

How it works "LED with Alarm" accessory

RELEASE DATE: Winter 2019/20

 HOW IT WORKS

The DRONE-RETRIEVER Visual & Audible Alarm Drone Finder

Most drone pilots don't want their drone to look like a Christmas tree with an audible alarm.

The DRONE RETRIEVER LED with ALARM device  is designed to be Inactive while flying and in the event of a fly-a-way or crash on non water surfaces, it then operates to provide an illuminated beacon with an audible alarm to facilitate visual  & audible location.

  • The delay of 30 min was selected as this appears to be greater than most drone rated flight times.
    Completely integrated device with control circuitry, On/Off Switch, LED light, 110db alarm, 2 day+ Rechargeable battery life, mounted with Dual Lock mounting system to allow for easy removal for recharging.
  • Weight 8 grams.   Insignificant effect on flight time for any drone.
  • Operation:
    • To arm unit TBD
    • To Disarm unit TBD
    • After 30 minutes delay, the White LED will flash every 5 seconds and the alarm will sound for 3 seconds every minute. until the battery power runs out or the device is  disarmed.

Tech Specs: Tentative

  • Size: (L x W x H): 24x13x16 mm 
  • Weight: 8 grams
  • Volume: Up to 110 dB
  • Working Time: 48 hours+
  • Charge Time: 1.5 hours
  • Battery: 100mAh LiPo
  • Input Voltage: 4.5 - 8.5 V
  • Charged with a standard 5v micro USB charger
     

.............. Expected Release Winter 2019/20 .................
.............. Expected Release Winter 2019/20 .................